Kahraman, S.2019-08-012019-08-0120070041-624X1874-9968https://dx.doi.org/10.1016/j.ultras.2007.05.003https://hdl.handle.net/11480/5343Sometimes engineers need to estimate the wet-rock P-wave velocity from the dry-rock P-wave velocity. An estimation equation embracing all rock classes will be useful for the rock engineers. To investigate the predictability of wet-rock P-wave velocity from the dry-rock P-wave velocity, P-wave velocity measurements were performed on 41 different rock types, 11 of which were igneous, 15 of which were sedimentary and 15 of which was metamorphic. In addition to the dry- and wet-rock P-wave velocity measurements, the P-wave velocity changing as a function of saturation degree was studied. Moreover, dry- rock S-wave velocity measurements were conducted. The test results were modeled using Gassmann's and Wood's theory and it was seen that the measured data did not fit the theories. The unconformity is due to the fact that the theories are valid for high-porosity unconsolidated sediments at low frequencies. Gassmann's equation was modified for the rocks except high-porosity unconsolidated sediments. The dry- and wet-rock P-wave velocity values were evaluated using regression analysis. A strong linear correlation between the dry- and wet-rock P-wave velocities was found. Regression analyses were repeated for the rock classes and it was shown that correlation coefficients were increased. Concluding remark is that the derived equations can be used for the prediction of wet-rock P-wave velocity from the dry- rock P-wave velocity. (c) 2007 Elsevier B. V. All rights reserved.eninfo:eu-repo/semantics/closedAccesswet-rock P-wave velocitydry-rock P-wave velocityregression analysisArticle46434134810.1016/j.ultras.2007.05.003176243882-s2.0-35348962043Q1WOS:000251268800007Q3