Korkanc, MustafaSolak, Burak2019-08-012019-08-0120161464-343X1879-1956https://dx.doi.org/10.1016/j.jafrearsci.2016.05.008https://hdl.handle.net/11480/3595Petrographic properties of rocks substantially affect their physical and mechanical properties. In the present study, for the purpose of examining the relationship between the petrographic and geomechanical properties of pyroclastic rocks, fresh samples were taken from tuffs of different textural properties that have wide distribution in Cappadocia region. Experimental studies were conducted on 20 fresh samples to determine their engineering properties through petrographic examinations. Dry and saturated unit weights, water absorption by weight, effective porosity, capillary water absorption, slake durability index, P-wave velocity, point load index, uniaxial compressive strength and nail penetration index of the samples were determined. Higher geomechanical values were obtained from the samples of Kayak tuffs affected by hydromechanical alteration and by tuffs with high welded rates. On thin sections prepared with the fresh samples, petrographic studies were carried out by using a point counter with a polarizing microscope, and mineral composition, texture, void ratio, volcanic glass presence and state of these fragments within the rock, secondary mineral formation and opaque mineral presence were determined. Grain/matrix ratio (GMR) was calculated by using the ratios of phenocrysts, microlites, volcanic glass, voids and opaque minerals after point counting on thin sections. A potential relationship between the petrographic and geomechanical properties of fresh samples was tried to determine by counting correlation analysis. Such a relationship can be significantly and extensively suggestible for engineering applications. For this purpose, we used the poorly-welded Kayak and densely-welded Kizilkaya tuff samples in our study. (C) 2016 Elsevier Ltd. All rights reserved.eninfo:eu-repo/semantics/closedAccessTuffPetrographic propertiesEngineering propertiesGrain/matrix ratioEstimation of engineering properties of selected tuffs by using grain/matrix ratioArticle12016017210.1016/j.jafrearsci.2016.05.0082-s2.0-84966930197Q2WOS:000378967700014Q3