Atalmis, GamzeDemiralp, MehmetYelegen, NebiKaplan, Yuksel2024-11-072024-11-0720230360-31991879-3487https://doi.org/10.1016/j.ijhydene.2022.12.078https://hdl.handle.net/11480/14381In this study, the process parameters that affect the improvement of hydrogen storage material properties were investigated. In order to accelerate the hydrogen charge/ discharge processes and to obtain the required hydrogen at the desired flow rates in a short time, the thermal conductivity of the storage materials has been improved, and density analyses have been made. The ideal grinding time has been determined for the LaNi5 material. Within the scope of the experimental studies, the thermal conductivity coefficients of LaNi5 coated with copper and LaNi5 ground for 5 h and coated with copper were increased by 500-750%, and the copper plating ratios were optimized. The materials obtained were characterized by XRD, SEM, and their density was measured with the Helium Pyknometer device and their thermal conductivity coefficients with the Hot Disk Thermal Constants Analyzer. In addition, the hydrogen storage of materials with increased thermal conductivity was investigated experimentally in the metal hydride reactor at the determined pressure. In the study, it was seen that the storage material coated with copper increases the heat transfer, reduces the hydrogen charging time in the metal hydride reactor, and increases the stable discharge time. & COPY; 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.eninfo:eu-repo/semantics/closedAccessHydrogen storageMetal hydrideThermal conductivityArticle4860230672307610.1016/j.ijhydene.2022.12.0782-s2.0-85149624279Q1WOS:001035413600001Q1