Yazar "Atis, Cengiz Duran" seçeneğine göre listele

Listeleniyor 1 - 4 / 4
  • Küçük Resim Yok
    Öğe
    An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete
    (PERGAMON-ELSEVIER SCIENCE LTD, 2010) Akcaozoglu, Semiha; Atis, Cengiz Duran; Akcaozoglu, Kubilay
    In this work, the utilization of shredded waste Poly-ethylene Terephthalate (PET) bottle granules as a lightweight aggregate in mortar was investigated. Investigation was carried out on two groups of mortar samples, one made with only PET aggregates and, second made with PET and sand aggregates together. Additionally, blast-furnace slag was also used as the replacement of cement on mass basis at the replacement ratio of 50% to reduce the amount of cement used and provide savings. The water-binder (w/b) ratio and PET-binder (PET/b) ratio used in the mixtures were 0.45 and 0.50, respectively. The size of shredded PET granules used in the preparation of mortar mixtures were between 0 and 4 mm. The results of the laboratory study and testing carried out showed that mortar containing only PET aggregate, mortar containing PET and sand aggregate, and mortars modified with slag as cement replacement can be drop into structural lightweight concrete category in terms of unit weight and strength properties. Therefore, it was concluded that there is a potential for the use of shredded waste PET granules as aggregate in the production of structural lightweight concrete. The use of shredded waste PET granules due to its low unit weight reduces the unit weight of concrete which results in a reduction in the death weight of a structural concrete member of a building. Reduction in the death weight of a building will help to reduce the seismic risk of the building since the earthquake forces linearly dependant on the dead-weight. Furthermore, it was also concluded that the use of industrial wastes such as PET granules and blast-furnace slag in concrete provides some advantages, i.e., reduction in the use of natural resources, disposal of wastes, prevention of environmental pollution, and energy saving. (C) 2009 Elsevier Ltd. All rights reserved.
  • Küçük Resim Yok
    Öğe
    Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates
    (ELSEVIER SCI LTD, 2011) Akcaozoglu, Semiha; Atis, Cengiz Duran
    In this work, the effect of Granulated Blast Furnace Slag (GBFS) and fly ash (FA) addition on the strength properties of lightweight mortars containing waste Poly-ethylene Terephthalate (PET) bottle aggregates was investigated. Investigation was carried out on three groups of mortar specimens. One made with only Normal Portland cement (NPC) as binder, second made with NPC and GBFS together and, third made with NPC and FA together. The industrial wastes mentioned above were used as the replacement of cement on mass basis at the replacement ratio of 50%. The size of shredded PET granules used as aggregate for the preparation of mortar mixtures were between 0 and 4 mm. The waste lightweight PET aggregate (WPLA)-binder ratio (WPLA/b) was 0.60; the water-binder (w/b) ratios were determined as 0.45 and 0.50. The dry unit weight, compressive and flexural-tensile strengths, carbonation depths and drying shrinkage values were measured and presented. The results have shown that modifying GBFS had positive effects on the compressive strength and drying shrinkage values (after 90 days) of the WPLA mortars. However, FA substitution decreased compressive and flexural-tensile strengths and increased carbonation depths. Nevertheless a visible reduction occurred on the drying shrinkage values of FA modifying specimens more than cement specimens and GBFS modified specimens. The test results indicated that, GBFS has a potential of using as the replacement of cement on the WPLA mortars by taking into consideration the characteristics. But using FA as a binder at the replacement ratio of 50% did not improve the overall strength properties. Although it was thought that, using FA as binder at the replacement ratio of 50% for the aim of production WPLA concrete which has a specific strength, would provide advantages of economical and ecological aspects. (C) 2011 Elsevier Ltd. All rights reserved.
  • Küçük Resim Yok
    Öğe
    Examination of mechanical properties and microstructure of alkali activated slag and slag-metakaolin blends exposed to high temperatures
    (Ernst & Sohn, 2022) Akcaozoglu, Semiha; Ciflikli, Murat; Bozkaya, Omer; Atis, Cengiz Duran; Ulu, Cuneyt
    This paper reports an experimental study of the influence of elevated temperature on alkali activated slag (AAS) and slag-metakaolin (MK) systems. The residual compressive and flexural tensile strengths, ultrasonic pulse velocity (UPV) and porosity and water absorption ratios of AAS and AAS-MK composites after subjected to elevated temperatures of 200, 400, 600, 800, and 1000 degrees C were investigated. Two different procedures were applied for cooling the specimens. The changes in the microstructure of the composites after subjected to high temperature were examined with scanning electron microscope and X-ray diffraction. Test results reveal that depending on the increasing temperature, the residual compressive strength, flexural tensile strength, and UPV values of the specimens decreased, and porosity and water absorption ratios increased. The minimum strength results of AAS and AAS-MK specimens were observed at 800 and 600 degrees C, respectively. In particular, there have been significant changes in the internal structure of AAS and AAS-MK specimens exposed to 1000 degrees C and new reaction products were observed. Test results have shown that AAS specimens are a new alternative that can be developed for use in environments exposed to high temperatures. Since this new composite contains only slag binder and slag aggregate, it can be an economical product that use fully recycled material and these properties can increase the application areas of environmentally friendly material.
  • Küçük Resim Yok
    Öğe
    Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)
    (ELSEVIER SCI LTD, 2013) Akcaozoglu, Semiha; Akcaozoglu, Kubilay; Atis, Cengiz Duran
    In this study, the influence of waste PET as lightweight aggregate (WPLA) replacement with conventional aggregate, on thermal conductivity, unit weight and compressive strength properties of concrete composite was investigated. For this purpose, five different mixtures were prepared (the control mixtures and four WPLA mixtures including 30%, 40%, 50%, and 60% waste PET aggregate by volume). Thermal conductivity (TC) coefficients of the specimens were measured with guarded hot plate apparatus according to TS ISO 8302 [1]. The thermal conductivity coefficient, unit weight and compressive strength of specimens decreased as the amount of WPLA increased in concrete. The minimum thermal conductivity value was 0.3924 W/m K, observed at 60% WPLA replacement. From this result, it was concluded that waste PET aggregates replacement with conventional aggregate in the mixture showed better insulation properties (i.e. lower thermal coefficient). Due to the low unit weight and thermal conductivity values of WPLA composites, there is a potential of using WPLA composites in construction applications. (c) 2012 Elsevier Ltd. All rights reserved.