Yazar "Kayabali, Kamil" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim Yok
    Öğe
    Investigation of the relationships between basic physical and mechanical properties and abrasion wear resistance of several natural building stones used in Turkey
    (Elsevier, 2021) Mohammed, Abdualrahman Ali Adam; Fener, Mustafa; Comakli, Ramazan; Ince, Ismail; Balci, Mehmet Can; Kayabali, Kamil
    From the past to the present, natural building stone has been used as construction materials in important buildings, architectural works, and civil engineering projects due to its characteristics, which include hardness, durability, decorative appearance, and easy shaping. Nevertheless, there are several significant properties such as abrasion resistance that limit its usability. Since natural stone wears over time, its abrasion wear resistance should be determined before use. One of the most widely used methods for testing to determine the abrasion resistance of natural stone is the Bohme abrasion test. However, this method has a number of disadvantages including sample preparation, labor, and difficult test procedures. Moreover, this testing device is not typically available in all laboratories or analysis centers. The aim of this study was to establish equations based on the basic physical and mechanical properties of natural building stone in order to estimate the abrasion wear resistance. Therefore, the relationships between the Bohme abrasion test results and the basic physical and mechanical properties such as porosity, percentage of water absorption by weight, dry unit weight, density, and uniaxial compressive strength of 22 different natural building stones, collected at different locations in Turkey, are analyzed statistically. Simple and multiple regression analyses were performed to identify the best relationships, and all the obtained equations were assigned correlation coefficient (R-2) values. The results indicated that there are strong correlations between the Bohme abrasion test results and the basic physical properties of natural building stone, and a moderate relationship with uniaxial compressive strength.
  • Küçük Resim Yok
    Öğe
    The effects of freeze-thaw (F-T) cycles on the Godene travertine used in historical structures in Konya (Turkey)
    (ELSEVIER SCIENCE BV, 2016) Gokce, Mehmedi Vehbi; Ince, Ismail; Fener, Mustafa; Taskiran, Taha; Kayabali, Kamil
    Travertine, a building material used around the globe for its decorative and easy-to-be-worked features from past to present, is naturally exposed to the freeze-thaw (F-T) process in cold regions in winters. As a result of this process, building stones deteriorate partially or completely. The greatest factor during the F-T process is the existence of water. The water contained in the body (in discontinuities and pores) of a building stone freezes along with the fall of temperature below 0 degrees C. Following freezing, the volume of water contained in discontinuities and pores increases. New fractures develop on the surfaces of pores as a result of outward pressure due to this increase in volume. As the temperature drops below 0 degrees C, the volume of water increases again, due to freezing. This process repeats itself with the decrease and increase in temperature and causes undesired deteriorations in the bodies of stones. This issue is quite important from the point of view of preservation and restoration of historical buildings, and foreseeing the effects of the F-T process on new buildings to be designed. In this study, the effects of the F-T process on Godene travertine were investigated. Godene travertine is a stone that has been widely used in historical buildings in Konya, a city that also covers catal Hoytik, which is known as one of the oldest human settlements in Anatolia. The stone is still being used in buildings constructed in the region. Fresh travertine stones obtained from the quarry were exposed to freeze and thaw cycles in different numbers. Values of porosity (n), uniaxial compressive strength (sigma(u)), point load strength (I-s(50)), Brazilian tensile strength (sigma(t)), Bohme abrasion loss (BA) and P wave velocity (V-p) were statistically evaluated and thus, the effects of the number of cycles on basic physical and mechanical characteristics of the Godene stone were investigated. Furthermore, deteriorations that took place in historical structures in the region were case-studied. (C) 2016 Elsevier B.V. All rights reserved.