Finite-element modelling of two-disc shrink fit assembly and an evaluation of material pairs of discs

Basit Öğe Kaydı
dc.authorid0000-0001-9517-7957
dc.contributor.authorOzturk, F.
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2011
dc.departmentNiğde ÖHÜ
dc.description.abstractIn this study, a two-disc shrink fit assembly was modelled in two dimension using ABAQUS/Standard to determine the interfacial pressures with respect to the interferences. Steel-steel and steel-aluminium material pairs were considered. Inner disc of the assembly was considered as hollow and solid shafts, respectively. The results indicate that the finite-element results were in good agreement with the analytical results. In the hollow shaft assembly, both the hollow shaft and the outer disc had non-uniform stress distribution. In the solid shaft assembly, uniform stress distribution for the solid shaft and non-uniform stress distribution for the outer disc were determined. It was pointed out that same pressure can be obtained by different interference with different material pairs. If the assembly has complex shapes, the finite-element method gives more comprehensive and accurate results than the analytical method.
dc.identifier.doi10.1243/09544062JMES2354
dc.identifier.endpage273
dc.identifier.issn0954-4062
dc.identifier.issueC2
dc.identifier.scopus2-s2.0-79751484041
dc.identifier.scopusqualityQ2
dc.identifier.startpage263
dc.identifier.urihttps://dx.doi.org/10.1243/09544062JMES2354
dc.identifier.urihttps://hdl.handle.net/11480/4794
dc.identifier.volume225
dc.identifier.wosWOS:000286600900001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorOzturk, F.
dc.language.isoen
dc.publisherPROFESSIONAL ENGINEERING PUBLISHING LTD
dc.relation.ispartofPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectshrink fit
dc.subjectshrink fit assembly
dc.subjectinterference fit
dc.subjectshrink fit simulation
dc.titleFinite-element modelling of two-disc shrink fit assembly and an evaluation of material pairs of discs
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu