Evaluation of tensile properties of 5754-O type aluminum- magnesium alloy at cold and warm temperature

Basit Öğe Kaydı
dc.contributor.authorOzturk, F.
dc.contributor.authorToros, S.
dc.contributor.authorPekel, H.
dc.date.accessioned2024-11-07T10:39:35Z
dc.date.available2024-11-07T10:39:35Z
dc.date.issued2008
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.descriptionCentral MOTEK Corporation; Daewoo Shipbuiling and Marine Engineering Co., LTD. (DSME); Doosan Heavy Industries and Construction Co., LTD.; et al.; Hyundai Motor Company; POSCO
dc.description9th International Conference on Technology of Plasticity, ICTP 2008 -- 7 September 2008 through 11 September 2008 -- Gyeongju -- 104766
dc.description.abstractIn this research, uniaxial tensile deformation behavior of 5754-O type aluminum-magnesium (Al- Mg) alloy sheets which are used widely in diverse applications ranging from automotive bodies to food processing due to their excellent high strength to weight ratio, corrosion resistance, and weldability were investigated at temperature range between -60 to 250oC and at the range of strain rates 0.0016-0.04 s-1. Mechanical properties such as yield strength (YS), ultimate tensile strength (UTS), strain hardening coefficient (n), strain rate sensitivity (m), total elongation (TE) and reduction of area (RA) were determined. In addition, the elimination of Luder's band (stretcher marks or line) elimination was investigated. The ductility of the alloy was calculated by two different methods. As a result, the ductility was found to increase with increasing temperature and to decrease with increasing strain rate. Luder's band elimination was observed with increasing temperatures and strain rates. The test results at cold temperatures indicated that an increase in total elongation and strain hardening coefficient were observed. Optimum formability condition was obtained at high temperature and low strain rate.
dc.identifier.endpage1626
dc.identifier.scopus2-s2.0-84899704920
dc.identifier.scopusqualityN/A
dc.identifier.startpage1621
dc.identifier.urihttps://hdl.handle.net/11480/11042
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherHanrimwon Publishing Co.
dc.relation.ispartof9th International Conference on Technology of Plasticity, ICTP 2008
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241106
dc.subjectAluminum alloys
dc.subjectCorrosion resistance
dc.subjectDuctility
dc.subjectFood processing
dc.subjectHigh strength alloys
dc.subjectMagnesium alloys
dc.subjectMagnesium printing plates
dc.subjectStrain hardening
dc.subjectStrain rate
dc.subjectTensile strength
dc.subjectAluminum - Magnesium alloys
dc.subjectDiverse applications
dc.subjectIncreasing temperatures
dc.subjectReduction of areas
dc.subjectStrain hardening coefficient
dc.subjectStrain rate sensitivity
dc.subjectUltimate tensile strength
dc.subjectUniaxial tensile deformation
dc.subjectPlasticity
dc.titleEvaluation of tensile properties of 5754-O type aluminum- magnesium alloy at cold and warm temperature
dc.typeConference Object

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu