Effects of cold and warm temperatures on springback of aluminium-magnesium alloy 5083-H111

Basit Öğe Kaydı
dc.authorid0000-0001-9517-7957
dc.contributor.authorOzturk, F.
dc.contributor.authorToros, S.
dc.contributor.authorKilic, S.
dc.contributor.authorBas, M. H.
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2009
dc.departmentNiğde ÖHÜ
dc.description.abstractSpringback is one of the most common problems in sheet metal forming processes. It causes improper fit, which creates serious problems during assembly of the parts. Based on material strength, a considerable amount of elastic recovery during unloading can be observed. in this study, springback behaviour of a hardened 5083-H111 aluminium-magnesium (Al-Mg) alloy with a thickness of 3 mm using a 600 angle V-shape die bending process at various temperatures ranging from -50 to 300 degrees C was investigated. The effects of temperature on springback behaviour were identified. Results indicate that springback increased with decreasing temperature. The same amount of springback was measured at 0, 25, and 100 degrees C. It was observed that the amount of springback increased between 100 and 200 degrees C and then started to decrease beyond 200 degrees C. The lowest springback was obtained at 300 degrees C.
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TOBiTAK) [106M058]; Experimental and Theoretical Investigations of the Effects of Temperature and Deformation Speed on Formability
dc.description.sponsorshipThis work is supported by the Scientific and Technological Research Council of Turkey (TOBiTAK), Project Number 106M058, 'Experimental and Theoretical Investigations of the Effects of Temperature and Deformation Speed on Formability'. This support is gratefully acknowledged.
dc.identifier.doi10.1243/09544054JEM1335
dc.identifier.endpage431
dc.identifier.issn0954-4054
dc.identifier.issn2041-2975
dc.identifier.issue4
dc.identifier.scopus2-s2.0-67651152641
dc.identifier.scopusqualityQ2
dc.identifier.startpage427
dc.identifier.urihttps://dx.doi.org/10.1243/09544054JEM1335
dc.identifier.urihttps://hdl.handle.net/11480/5074
dc.identifier.volume223
dc.identifier.wosWOS:000265703100008
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthor[0-Belirlenecek]
dc.language.isoen
dc.publisherSAGE PUBLICATIONS LTD
dc.relation.ispartofPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectspringback
dc.subject5083-H111 aluminium-magnesium alloy
dc.subjectV-bending
dc.subjectwarm forming
dc.titleEffects of cold and warm temperatures on springback of aluminium-magnesium alloy 5083-H111
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu