Optimization of Cutting Parameters in Turning of Titanium Alloy (Grade 5) by Analysing Surface Roughness, Tool Wear and Energy Consumption

Basit Öğe Kaydı
dc.authoridAKKUS, Harun/0000-0002-9033-309X
dc.authoridYAKA, HARUN/0000-0003-4859-9609
dc.contributor.authorAkkus, H.
dc.contributor.authorYaka, H.
dc.date.accessioned2024-11-07T13:31:20Z
dc.date.available2024-11-07T13:31:20Z
dc.date.issued2022
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractIn this study, Ti 6Al-4 V (grade 5) ELI alloy was machined with minimum energy and optimum surface quality and minimum tool wear. The appropriate cutting tool and suitable cutting parameters have been selected. As a result of the turning process, average surface roughness (Ra), tool wear and energy consumption were measured. The results have been analyzed by normality test, linear regression model, Taguchi analysis, ANOVA, Pareto graphics and multiple optimization method. It has been observed that high tool wear value increases Ra and energy consumption. In multiple optimization, it was concluded that it made predictions with 89,1% accuracy for Ra, 58,33% for tool wear, 96,75% for energy consumption. While the feed rate was the effective parameter for Ra and energy consumption, the effective parameter in tool wear was the cutting speed. Our study has revealed that by controlling energy consumption, surface quality can be maintained and tool wear can be controlled.
dc.description.sponsorshipAmasya University Scientific Research Projects Coordination Unit [FMB-BAP 19-0412]
dc.description.sponsorshipThis study was supported by Amasya University Scientific Research Projects Coordination Unit with the project of FMB-BAP 19-0412.
dc.identifier.doi10.1007/s40799-021-00525-6
dc.identifier.endpage956
dc.identifier.issn0732-8818
dc.identifier.issn1747-1567
dc.identifier.issue6
dc.identifier.pmid34848920
dc.identifier.scopus2-s2.0-85120657897
dc.identifier.scopusqualityQ2
dc.identifier.startpage945
dc.identifier.urihttps://doi.org/10.1007/s40799-021-00525-6
dc.identifier.urihttps://hdl.handle.net/11480/14767
dc.identifier.volume46
dc.identifier.wosWOS:000722168100002
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.indekslendigikaynakPubMed
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofExperimental Techniques
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241106
dc.subjectTurning
dc.subjectApplied statistics
dc.subjectMultiple optimization
dc.subjectSurface roughness
dc.subjectTool wear
dc.subjectEnergy consumption
dc.titleOptimization of Cutting Parameters in Turning of Titanium Alloy (Grade 5) by Analysing Surface Roughness, Tool Wear and Energy Consumption
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu