Experimental and numerical analysis of out-of-plane formability test
Küçük Resim Yok
Tarih
2005
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
ELSEVIER SCIENCE SA
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Out-of-plane (dome) formability test is used extensively to determine forming limit diagrams (FLDs) of sheet metals. Strain paths are generated to form the FLD using this test. In this research, a comparative study was performed between measured and predicted strain paths. Numerical predictions are well suited with the experimental results. The strain paths from finite element simulations are found fairly acceptable to represent both sides of the FLD. The effects of mesh size and lubrication conditions on the forming limit diagram were also investigated. (c) 2005 Elsevier B.V. All rights reserved.
Açıklama
Anahtar Kelimeler
FLD, forming limit diagram, ABAQUS, finite element, out-of-plane, dome test
Kaynak
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
170
Sayı
45323
