Tensile and Spring-Back Behavior of DP600 Advanced High Strength Steel at Warm Temperatures

dc.authorid0000-0001-9517-7957
dc.contributor.authorOzturk, F.
dc.contributor.authorToros, S.
dc.contributor.authorKilic, S.
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2009
dc.departmentNiğde ÖHÜ
dc.description.abstractIn recent years, the use of advanced high strength steels in automotive industry has been increased remarkably. Among advanced high strength steels, dual phase (DP) steels have gained a great attention owing to a combination of high strength and good formability. However, high strength usually increases the spring-back behavior of the material, which creates problems for the parts during the assembly. Thus, the uniaxial tensile deformation and spring-back behaviors of DP600 advanced high strength steel were investigated in rolling (0 degrees), diagonal (45 degrees), and transverse (90 degrees) directions in the temperature range from room temperature (RT) to 300 degrees C. All tests were performed at a deformation speed of 25 mm/min. A V-shaped die (60 degrees) was used for the spring-back measurements. The results indicated that the formability and spring-back of the material were decreased with increasing the temperatures. The material showed complex behaviors in different directions and at different temperatures.
dc.description.sponsorshipScientific and Technological Research Council of Turkey [107M596]
dc.description.sponsorshipItem Sponsored by Scientific and Technological Research Council of Turkey (107M596)
dc.identifier.doi10.1016/S1006-706X(10)60025-8
dc.identifier.endpage46
dc.identifier.issn1006-706X
dc.identifier.issn2210-3988
dc.identifier.issue6
dc.identifier.scopus2-s2.0-77950322187
dc.identifier.scopusqualityQ2
dc.identifier.startpage41
dc.identifier.urihttps://dx.doi.org/10.1016/S1006-706X(10)60025-8
dc.identifier.urihttps://hdl.handle.net/11480/4998
dc.identifier.volume16
dc.identifier.wosWOS:000273224100008
dc.identifier.wosqualityQ4
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthor[0-Belirlenecek]
dc.language.isoen
dc.publisherSPRINGER
dc.relation.ispartofJOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectadvanced high strength steel
dc.subjectDP600
dc.subjectwarm forming
dc.subjectspring-back
dc.titleTensile and Spring-Back Behavior of DP600 Advanced High Strength Steel at Warm Temperatures
dc.typeArticle

Dosyalar