Examining combustion and emission characteristics of cotton methyl ester to which manganese additive material was added

Basit Öğe Kaydı
dc.contributor.authorCelik M.
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2017
dc.departmentNiğde ÖHÜ
dc.description.abstractImportant researches is being conducted in order to decrease the emissions and fuel consumption. Emissions and fuel consumption has been dramatically decreased by engine design studies. On the other hand it is difficult to obtain the desired results by engine desing only. Studies are being made on fuel additives so as to improve the engine performance, combustion and emission characteristics. In this study manganese additive was added into a cotton methyl ester (C0) and accordingly combustion and emission characteristics at full load and different speed intervals were examined. In the experiments conducted for this mixture a diesel engine with single cylinder was used and the maximum power was obtained at 2750 rpm. Maximum cylinder pressure was obtained at 2200 rpm where as maximum moment was obtained in C0Mn12 fuel. At the same time heat release rate was at 0.021 kJ/°CA and maximum rate of pressure rise was found to be 6.73 bar/°CA. Minimum CO and THC emission were obtained at 2200 rpm and maximum decrease in THC emisssion occured with the C0Mn12 fuel when compared to the C0 fuel, maximum decrease in THC was found to be 5.01 %. Maximum increase in emissions when compare to C0 fuel was 11.58 % in C0Mn12 fuel at 3250 rpm while they were 33.14 % at 1750 rpm. At 2750 rpm maximum decrease of emissions in the C0Mn12 fuel was found to be 2.74 %. © 2017, The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature.
dc.identifier.doi10.1007/s12206-017-1148-3
dc.identifier.endpage6050
dc.identifier.issn1738494X
dc.identifier.issue12
dc.identifier.scopus2-s2.0-85038078348
dc.identifier.scopusqualityN/A
dc.identifier.startpage6041
dc.identifier.urihttps://dx.doi.org/10.1007/s12206-017-1148-3
dc.identifier.urihttps://hdl.handle.net/11480/1763
dc.identifier.volume31
dc.identifier.wosWOS:000418144900048
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorCelik M.
dc.language.isoen
dc.publisherKorean Society of Mechanical Engineers
dc.relation.ispartofJournal of Mechanical Science and Technology
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectBiodiesel
dc.subjectCotton methyl ester
dc.subjectEngine performance
dc.subjectExhaust emissions
dc.subjectFuel additive
dc.titleExamining combustion and emission characteristics of cotton methyl ester to which manganese additive material was added
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu