Installation of Test Setup and Measurement Procedures in Fir Wood Hydraulic Conductance Measurement

Basit Öğe Kaydı
dc.authoridKOKSAL, SUHEYLA ESIN/0000-0001-7970-8412
dc.contributor.authorKoksal, Suheyla Esin
dc.contributor.authorGunduz, Gokhan
dc.contributor.authorKalkat, Menderes
dc.date.accessioned2024-11-07T13:32:56Z
dc.date.available2024-11-07T13:32:56Z
dc.date.issued2021
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractFor a hydraulic conductor, through which liquid flows, hydraulic conductance (K, ml.s(-1).MPa-1) is defined as the ratio of pressure difference at the inlet and outlet to the fluid amount passing through the hydraulic conductor in a unit time period. This property is one of the key functions of the wood, and is obtained by the flow rate (F - Flow, ml.s(-1)) along the wood sample divided by the pressure difference driving the flow (Delta P MPa). This study aimed to establish a test setup to determine the hydraulic conductance values of Uludag Fir (Abies bornmulleriana Hattf). A test setup was established to measure the amount of water that flows in samples and pressure difference in characterized capillary tubes. In addition, calibration of the test apparatus is explained in detail. Fir wood samples taken from Yedigoller, which is affiliated to Kale Operation Chieftainship and Bolu Forest Regional Directorate, of 4 mm in diameter and 3 cm in length were prepared and hydraulic conductance measurements were performed, and the results are presented in this article. The installed test setup was used to obtain the following information about frees: operation of the hydraulic conduction system, the amount of needed water, seasonal effects and stress-related changes.
dc.identifier.doi10.5552/drvind.2021.1945
dc.identifier.endpage119
dc.identifier.issn0012-6772
dc.identifier.issn1847-1153
dc.identifier.issue2
dc.identifier.scopus2-s2.0-85106599131
dc.identifier.scopusqualityQ2
dc.identifier.startpage111
dc.identifier.urihttps://doi.org/10.5552/drvind.2021.1945
dc.identifier.urihttps://hdl.handle.net/11480/15694
dc.identifier.volume72
dc.identifier.wosWOS:000649180300001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherZagreb Univ, Fac Forestry
dc.relation.ispartofDrvna Industrija
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241106
dc.subjecthydraulic conductance
dc.subjecttest setup
dc.subjectfir wood
dc.titleInstallation of Test Setup and Measurement Procedures in Fir Wood Hydraulic Conductance Measurement
dc.title.alternativeInstaliranje opreme i mjernih postupaka pri odre?ivanju hidrauli?ke vodljivosti jelovine
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu