Dominant rock properties affecting the penetration rate of percussive drills
Küçük Resim Yok
Tarih
2003
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier BV
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Percussive blast hole drills were observed in eight rock types at an open pit mine and three motorway sites. The net penetration rates of the drills were calculated from the performance measurements. Rock samples were collected from the drilling locations and the physical and mechanical properties of the rocks were determined both in the field and in the laboratory. The penetration rates were correlated with the rock properties. The uniaxial compressive strength, the Brazilian tensile strength, the point load strength and the Schmidt hammer value exhibit strong correlations with the penetration rate. Impact strength shows a fairly good correlation with penetration rate. Weak correlations between penetration rate and both elastic modulus and natural density were found. Any significant correlation between penetration rate and P-wave velocity was not found. It was concluded that, among the rock properties adopted in this study, the uniaxial compressive strength, the Brazilian tensile strength, the point load strength and the Schmidt hammer value are the dominant rock properties effecting the penetration rate of percussive drills. Theoretical specific energy as defined by different research workers is proved also to be well correlated with penetration rate of percussive drills which verifies basic theoretical works on the subject. In addition, the point load and the Schmidt hammer test can practically be used in the field as a predictive tool for the estimation of penetration rate. © 2003 Elsevier Ltd. All rights reserved.
Açıklama
Anahtar Kelimeler
Kaynak
International Journal of Rock Mechanics and Mining Sciences
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
40
Sayı
5