Predicting the noise level during sawing of carbonate rocks from the P-wave velocity

Basit Öğe Kaydı
dc.contributor.authorKahraman, Sair
dc.contributor.authorDelibalta, M. Suat
dc.contributor.authorComakli, Ramazan
dc.date.accessioned2024-11-07T10:39:28Z
dc.date.available2024-11-07T10:39:28Z
dc.date.issued2019
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description23rd International Congress on Acoustics: Integrating 4th EAA Euroregio, ICA 2019 -- 9 September 2019 through 23 September 2019 -- Aachen -- 165294
dc.description.abstractNoise affects humans both physically and psychologically, whose impacts vary from person to person. Block cutting machine is one of the most important noise sources in the stone processing plants. This study investigates the predictability of the noise level generated during sawing of carbonate rocks from the P-wave velocity. First, the P-wave velocities of rock samples were measured in the laboratory. Then, the core samples were cut by an automatic cutting machine with diamond saw in the laboratory and noise levels were measured. A strong linear correlation was found between the noise levels and the P-wave velocity. After including the densities of the samples to the analysis, the correlation coefficient was increased significantly. It is concluded that the noise level of carbonate rocks can be estimated using the derived equations from the P-wave velocity. The laboratory noise level can be converted to the site noise level using a conversion factor. © 2019 Proceedings of the International Congress on Acoustics. All rights reserved.
dc.description.sponsorshipScientific Research Project Unit of Nigde Omer Halisdemir University, (FEB 2009/03); Alexander von Humboldt-Stiftung
dc.identifier.doi10.18154/RWTH-CONV-238811
dc.identifier.endpage7607
dc.identifier.isbn978-393929615-7
dc.identifier.issn2226-7808
dc.identifier.scopus2-s2.0-85099330523
dc.identifier.scopusqualityN/A
dc.identifier.startpage7602
dc.identifier.urihttps://doi.org/10.18154/RWTH-CONV-238811
dc.identifier.urihttps://hdl.handle.net/11480/10997
dc.identifier.volume2019-September
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherInternational Commission for Acoustics (ICA)
dc.relation.ispartofProceedings of the International Congress on Acoustics
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241106
dc.subjectNoise
dc.subjectP-wave velocity
dc.subjectRock sawing
dc.titlePredicting the noise level during sawing of carbonate rocks from the P-wave velocity
dc.typeConference Object

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu