Influence of calcined diatomite content and elevated temperatures on the properties of high strength mortars produced with basalt sand
Küçük Resim Yok
Tarih
2020
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Ernst & Sohn
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this paper, the effect of calcined diatomite (CDT) content on the mechanical, microstructural, and mineralogical properties of high strength mortars (HSMs) exposed to 25, 400, 600, 800, and 1,000 degrees C temperatures is investigated. The percentages of CDT that replace Portland cement (PC) in this work are 0, 5, 10, 15, and 20%, by weight. The researched properties of the HSMs are the unit weight (U-w), ultrasonic pulse velocity (U-pv), flexural strength (f(s)), compressive strength (f(c)) and the analyses of X-ray powder diffraction, polarized light microscopy, and scanning electron microscopy/energy dispersive spectroscopy. The experimental results show that the CDT has a potential to be successfully employed as a partial replacement of PC in the HSMs exposed to elevated temperatures. The optimal replacement level of PC by CDT is determined as 15% from strength tests. Besides, the U-w, U-pv, f(s), and f(c) values progressively reduce as the temperatures subjected to the HSMs increase. The CDT has a positive effect on the f(s) and f(c) values the HSMs after exposure to elevated temperatures.
Açıklama
Anahtar Kelimeler
calcined diatomite, elevated temperature, high-strength mortar, mechanical properties, microstructure
Kaynak
Structural Concrete
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
