Tensile deformation behavior of AA5083-H111 at cold and warm temperatures

dc.authorid0000-0001-9517-7957
dc.contributor.authorOzturk, Fahrettin
dc.contributor.authorToros, Serkan
dc.contributor.authorKilic, Suleyman
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2010
dc.departmentNiğde ÖHÜ
dc.description.abstractThe effects of strain rate and temperature on the deformation behavior of hardened 5083-H111 aluminum magnesium alloy sheet were investigated by performing uniaxial tensile tests at various strain rates from 0.0083 to 0.16 s(-1) and temperatures from -100 to 300 degrees C. Results from the prescribed test ranges indicate that the formability of this material at cold and warm temperatures is better than at room temperature. The improvement in formability at cold temperatures is principally due to the strain hardening of the material. However, the improvement at warm temperature and low strain rate is specifically due to the high strain rate sensitivity characteristic of the material. Results indicate that this alloy should be formed at temperatures higher than 200 C and at low strain rates.
dc.description.sponsorshipThe Scientific and Technological Research Council of Turkey (TUBITAK) [106M058]
dc.description.sponsorshipThis work is supported by The Scientific and Technological Research Council of Turkey (TUBITAK). Project Number: 106M058, Title: "Experimental and Theoretical Investigations of The Effects of Temperature and Deformation Speed on Formability". TUBITAK support is profoundly acknowledged.
dc.identifier.doi10.3139/146.110391
dc.identifier.endpage1179
dc.identifier.issn1862-5282
dc.identifier.issue9
dc.identifier.scopus2-s2.0-77957226072
dc.identifier.scopusqualityQ3
dc.identifier.startpage1172
dc.identifier.urihttps://dx.doi.org/10.3139/146.110391
dc.identifier.urihttps://hdl.handle.net/11480/4844
dc.identifier.volume101
dc.identifier.wosWOS:000282026300014
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthor[0-Belirlenecek]
dc.language.isoen
dc.publisherCARL HANSER VERLAG
dc.relation.ispartofINTERNATIONAL JOURNAL OF MATERIALS RESEARCH
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectAluminum-magnesium alloys
dc.subject5083-H111
dc.subjectWarm forming
dc.subjectCold forming
dc.titleTensile deformation behavior of AA5083-H111 at cold and warm temperatures
dc.typeArticle

Dosyalar