Strain rate sensitivity and strain hardening response of DP1000 dual phase steel
Küçük Resim Yok
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
EDP Sciences
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, strain hardening and strain rate sensitivity behavior of commercial DP1000 dual phase steel have been examined in detail at temperatures of 25 °C, 100 °C, 200 °C and 300 °C, at strain rates of 0.0016 s -1 and 0.16 s -1 . As the strain rate has increased, the yield strength has increased but no significant change in tensile strength and strain hardening coefficient has been observed. As the temperature has increased, the yield and tensile strength has decreased in between 25 and 200 °C but it has showed an increase at 300 °C. The strain hardening coefficient has increased in parallel with temperature increase. It has been seen that the strain rate sensitivity has not been affected by temperature. No significant difference in the hardening rate has appeared in between 25 and 200 °C, but the highest value has been calculated at 300 °C. It has been determined that the fracture behavior has occurred earlier and load carrying capacity on necking has reduced with the increase of strain rate and not significantly affected by temperature. © 2018 EDP Sciences.
Açıklama
Anahtar Kelimeler
DP1000, Dual phase, Steel, Strain hardening, Strain rate sensitivity
Kaynak
Metallurgical Research and Technology
WoS Q Değeri
Q4
Scopus Q Değeri
Q2
Cilt
115
Sayı
5