Application of a coating mixture for solid oxide fuel cell interconnects

Basit Öğe Kaydı
dc.contributor.authorUnal, Fatma Aydin
dc.contributor.authorMat, Mahmut D.
dc.contributor.authorDemir, Ibrahim
dc.contributor.authorKaplan, Yuksel
dc.contributor.authorVeziroglu, Nejat
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2015
dc.departmentNiğde ÖHÜ
dc.description.abstractDue to high operating temperature (800-1000 degrees C) of SOFC's, limited number of alloys can be employed for the purpose of current collection. The electrical conductivity of these alloys usually decreases during the operation of SOFC because of highly corrosive cathode (air side) environment. Cr evaporation from such alloys is also an important problem of performance degradation. A spinel Mn1.5Co1.5O4 and perovskite La0.60Sr0.40FeO3 mixture is coated on Crofer alloy for corrosion and chromium protection in the cathode side of a SOFC. In study firstly, the performance of the fuel cell with the Crofer 22 APU as interconnect material was measured up to 100 h without any coating. Secondly, using a screen printing method, bare Crofer 22 APU was coated with Mn1.5Co1.5O4 and finally Mn1.5Co1.5O4 + La0.60Sr0.40FeO3 ceramic powder slurries were employed as the coating material. Then, the performances of a SOFC short stack with interconnects coated by two methods were compared with uncoated interconnect. Results show that uncoated interconnect experienced a significant performance lost from 4.5 W to 3.8 W. On the other hand the cells with screen printing coated with a mixture Mn1.5Co1.5O4 and La0.60Sr0.40FeO3 exhibited decreases only from 5.78 W to 5.42 W in the short-term performance tests. Copyright (c) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
dc.identifier.doi10.1016/j.ijhydene.2015.03.031
dc.identifier.endpage7693
dc.identifier.issn0360-3199
dc.identifier.issn1879-3487
dc.identifier.issue24
dc.identifier.scopus2-s2.0-84930380837
dc.identifier.scopusqualityQ1
dc.identifier.startpage7689
dc.identifier.urihttps://dx.doi.org/10.1016/j.ijhydene.2015.03.031
dc.identifier.urihttps://hdl.handle.net/11480/3917
dc.identifier.volume40
dc.identifier.wosWOS:000356549000033
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthor[0-Belirlenecek]
dc.language.isoen
dc.publisherPERGAMON-ELSEVIER SCIENCE LTD
dc.relation.ispartofINTERNATIONAL JOURNAL OF HYDROGEN ENERGY
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectSolid oxide fuel cells
dc.subjectCrofer 22 APU
dc.subjectMn1.5Co1.5O4
dc.subjectLa0.60Sr0.40FeO3
dc.subjectFerritic stainless steels
dc.subjectInterconnect
dc.titleApplication of a coating mixture for solid oxide fuel cell interconnects
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu