Effect of Combined Mechanical and Ultrasonic Milling on the Size Reduction of Talc

Basit Öğe Kaydı
dc.authoridKATIRCIOGLU BAYEL, Diler/0000-0002-0336-8770
dc.contributor.authorKatircioglu-Bayel, Diler
dc.date.accessioned2024-11-07T13:25:04Z
dc.date.available2024-11-07T13:25:04Z
dc.date.issued2020
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractThis study aims to investigate the effect of combined mechanical and ultrasonic milling on the size reduction of talc. Firstly, the talc sample was wet ground in a stirred media mill for five different times (30, 60, 90, 120, and 150 min), and the optimum result was subsequently achieved with treatment by ultrasonication. The effects of amplitude (20, 35, and 50 mu m), solid content (2.5, 5, 7.5, and 10%), and sonication time (60, 120, and 240 min) on the sizes of the final product were investigated. The pre-milling by wet grinding caused a decrease in the grinding resistance of talc. Sequential ultrasonic treatment, which was applied to the talc sample, generated smaller particles in comparison to those acquired by stirred media milling alone. Experimental results were assessed based on the product particle size (d(10), d(50)), reduction ratio, and specific energy consumption. Submicron particles prepared by ultrasonic treatment were perfectly stable compared to stirred media milling alone as investigated in terms of particle size. In addition, the effects of mechanical and ultrasonic milling on structural properties of talc particles were characterized by XRD analysis.
dc.identifier.doi10.1007/s42461-019-00105-8
dc.identifier.endpage320
dc.identifier.issn2524-3462
dc.identifier.issn2524-3470
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85069481704
dc.identifier.scopusqualityQ2
dc.identifier.startpage311
dc.identifier.urihttps://doi.org/10.1007/s42461-019-00105-8
dc.identifier.urihttps://hdl.handle.net/11480/14475
dc.identifier.volume37
dc.identifier.wosWOS:000515922600027
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer Heidelberg
dc.relation.ispartofMining Metallurgy & Exploration
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241106
dc.subjectStirredmedia mill
dc.subjectUltrasonication
dc.subjectTalc
dc.subjectSubmicron particles
dc.subjectSize reduction
dc.titleEffect of Combined Mechanical and Ultrasonic Milling on the Size Reduction of Talc
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu