Microstructural, mechanical, electrical and thermal characterization of arc-melted Ni-Si and Co-Si alloys

Basit Öğe Kaydı
dc.contributor.authorCadirli, E.
dc.contributor.authorHerlach, D. M.
dc.contributor.authorDavydov, E.
dc.date.accessioned2019-08-01T13:38:39Z
dc.date.available2019-08-01T13:38:39Z
dc.date.issued2010
dc.departmentNiğde ÖHÜ
dc.description.abstractThis work presents the results of characterization of as solidified arc-melted Ni-Si and Co-Si alloys. The alloys of different compositions of the constitutions Ni, Co, and Si of purity of 99.99% were prepared by arc melting method under argon atmosphere in a water-cooled copper crucible with a non-consumable tungsten electrode and titanium getter. The effects of Si addition to pure Ni and Co on microstructure, microhardness (HV), electrical resistivity (p), latent heat of fusion (AN) and specific heat change (AC) were investigated. The measurements of microhardness of the samples were performed by using a microhardness test device. The dependence of microhardness on composition (C-o) was analyzed. According to these results, it has been found that with increasing the amount of Si the HV increases. Variations of electrical resistivity of the samples with the temperature in the range of 300-800 K were also measured by using a standard d.c. four-point probe technique. The Delta H and Delta C-p of the same alloys were determined by means of differential scanning calorimeter (DSC) from heating trace during the transformation from solid to liquid. (C) 2010 Elsevier B.V. All rights reserved.
dc.description.sponsorshipScientific and Technical Research Council of Turkey (TUBITAK) [2219]
dc.description.sponsorshipThis research was supported financially by the Scientific and Technical Research Council of Turkey (TUBITAK) under 2219 postdoctoral research fellowship program. The authors thank Jorn Strohmenger and Dr. Roman Lengsdorf, for their continuous support and Dr Matthias Kolbe for support of the electron microscope investigations.
dc.identifier.doi10.1016/j.jnoncrysol.2010.06.005
dc.identifier.endpage1741
dc.identifier.issn0022-3093
dc.identifier.issn1873-4812
dc.identifier.issue33-34
dc.identifier.scopus2-s2.0-77955549423
dc.identifier.scopusqualityQ2
dc.identifier.startpage1735
dc.identifier.urihttps://dx.doi.org/10.1016/j.jnoncrysol.2010.06.005
dc.identifier.urihttps://hdl.handle.net/11480/4863
dc.identifier.volume356
dc.identifier.wosWOS:000281931600021
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthor[0-Belirlenecek]
dc.language.isoen
dc.publisherELSEVIER SCIENCE BV
dc.relation.ispartofJOURNAL OF NON-CRYSTALLINE SOLIDS
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectMicrostructure
dc.subjectMicrohardness
dc.subjectElectrical resistivity
dc.subjectLatent heat of fusion
dc.subjectSpecific heat change
dc.titleMicrostructural, mechanical, electrical and thermal characterization of arc-melted Ni-Si and Co-Si alloys
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu