Warm deformation and fracture behaviour of DP1000 advanced high strength steel

Basit Öğe Kaydı
dc.authoridToros, Serkan/0000-0003-0438-2862
dc.authoridGurun, Hakan/0000-0001-6189-6830
dc.authoridCAVUSOGLU, ONUR/0000-0002-7239-3902
dc.contributor.authorCavusoglu, Onur
dc.contributor.authorToros, Serkan
dc.contributor.authorGurun, Hakan
dc.contributor.authorGural, Ahmet
dc.date.accessioned2024-11-07T13:32:03Z
dc.date.available2024-11-07T13:32:03Z
dc.date.issued2018
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractThe effect of temperature has been investigated on the mechanical properties and fracture behaviour of DP1000 advanced high-strength steel. The variation of the mechanical properties depending on temperature has been determined by performing uniaxial tensile tests at the temperatures of 25, 100, 200, 300 degrees C at the rolling directions of 0 degrees (rolling), 45 degrees (diagonal), and 90 degrees (transverse) at the strain rate of 0.0083 s(-1). The yield strength and tensile strength have showed a slight decrease tendency between 25 and 200 degrees C, but the highest value has been reached by showing an increase at 300 degrees C temperature. The amount of elongation has not been affected significantly with the increase of the temperature. While hardening coefficient has increased due to the rising temperature, no effect has been observed on strength coefficient between 25 and 100 degrees C, but an increase has occurred at higher temperature values.
dc.identifier.doi10.1080/03019233.2017.1309168
dc.identifier.endpage625
dc.identifier.issn0301-9233
dc.identifier.issn1743-2812
dc.identifier.issue7
dc.identifier.scopus2-s2.0-85017421335
dc.identifier.scopusqualityQ2
dc.identifier.startpage618
dc.identifier.urihttps://doi.org/10.1080/03019233.2017.1309168
dc.identifier.urihttps://hdl.handle.net/11480/15194
dc.identifier.volume45
dc.identifier.wosWOS:000442080500005
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherTaylor & Francis Ltd
dc.relation.ispartofIronmaking & Steelmaking
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241106
dc.subjectTemperature
dc.subjecttensile
dc.subjectfracture
dc.subjectdual phase
dc.subjectDP1000
dc.titleWarm deformation and fracture behaviour of DP1000 advanced high strength steel
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu