Influences of operating parameters on dry ball mill performance
Küçük Resim Yok
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Oficyna Wydawnicza Politechniki Wroclawskiej
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The paper is aimed to investigate the influence of operating parameters on dry fine grinding of calcite in a laboratory scale conventional ball mill. Within the context, the influence of operating parameters such as mill speed, ball filling ratio, ball size distribution, powder filling ratio, grinding aid dosage and grinding time were studied. The results of grinding tests were evaluated based on the product particle size (d50, d80) and surface area (m2/kg). As a result of this study, optimum grinding test conditions determined to be 70% of Nc, J=0.35 for ball filling ratio, 40 mm (10%), 32 mm (10%), 20 mm (40%), 12 mm (40%) for ball size distribution, fc=0.125 for powder filling ratio, 2000 g/Mg for grinding aid dosage and 60 min for grinding time. After determining optimum grinding conditions, the influence of grinding aid dosage on powder fluidity was determined. The use of 2000 g/Mg grinding aid dosage had a greater fluidizing effect compared to the other dosages and no aid condition (0 g/Mg). The influence of grinding aid on dry fine grinding of calcite was also examined by Fourier Transform Infrared Spectroscopy (FTIR). FTIR measurements indicated that grinding aid was adsorbed on the ground calcite particles surface. © Wroclaw University of Science and Technology.
Açıklama
Anahtar Kelimeler
Conventional ball mill, Fluidity index, Fourier Transform Infrared Spectroscopy, Grinding aid, Particle size, Surface area
Kaynak
Physicochemical Problems of Mineral Processing
WoS Q Değeri
Q3
Scopus Q Değeri
Q3
Cilt
54
Sayı
3
