Computer aided control of cutting error in textile products
Küçük Resim Yok
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Ege Universitesi
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
At present, the audits about the cutting error of textile products (leather, fabric, etc.) are made by the human by the eye via the template. Making these audits that necessitate accurate measurement by eye both takes so much time and enhance the risk occurrence risk. In this article, the image processing based industrial quality control system that determines the cutting errors of textile products automatically and discriminates between faulty and faultless products is explained. The system minimizes the faults based upon the human auditing and increases the number of pieces that are controlled by the unit of time. The performed system is composed of Panel PC, line scan camera, system of conveyor, basket control unit, image processing software and control user interface. The textile pieces (cuts) to be inspected come into the part by the conveyor where the camera and illumination unit are available, and the image is captured. This captured image is sent to the Panel PC and controlled whether there is a cutting error via image processing software. According to the result of the audit, the basket system at the end of the conveyor (conveyor belt) moves back and forth on wheel rail, and the textile pieces are provided to fall into the required basket. The performed system was tested on the leather pieces that were taken from a company in the leather sector. Totally it was tried by 150 times for 50 pieces of leather in 5 different templates and these pieces felt into the required basket correctly by discriminating for faulty/faultiness ones by 149 times (99,33% success ratio).
Açıklama
Anahtar Kelimeler
Image processing, Textile cutting errors, Textile quality control
Kaynak
Tekstil ve Konfeksiyon
WoS Q Değeri
Scopus Q Değeri
Q3
Cilt
27
Sayı
3
