Computer aided control of cutting error in textile products

Basit Öğe Kaydı
dc.contributor.authorÇevik, Kerim Kürsat
dc.contributor.authorKoçer, Hasan Erdinç
dc.date.accessioned2024-11-07T10:39:49Z
dc.date.available2024-11-07T10:39:49Z
dc.date.issued2017
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractAt present, the audits about the cutting error of textile products (leather, fabric, etc.) are made by the human by the eye via the template. Making these audits that necessitate accurate measurement by eye both takes so much time and enhance the risk occurrence risk. In this article, the image processing based industrial quality control system that determines the cutting errors of textile products automatically and discriminates between faulty and faultless products is explained. The system minimizes the faults based upon the human auditing and increases the number of pieces that are controlled by the unit of time. The performed system is composed of Panel PC, line scan camera, system of conveyor, basket control unit, image processing software and control user interface. The textile pieces (cuts) to be inspected come into the part by the conveyor where the camera and illumination unit are available, and the image is captured. This captured image is sent to the Panel PC and controlled whether there is a cutting error via image processing software. According to the result of the audit, the basket system at the end of the conveyor (conveyor belt) moves back and forth on wheel rail, and the textile pieces are provided to fall into the required basket. The performed system was tested on the leather pieces that were taken from a company in the leather sector. Totally it was tried by 150 times for 50 pieces of leather in 5 different templates and these pieces felt into the required basket correctly by discriminating for faulty/faultiness ones by 149 times (99,33% success ratio).
dc.identifier.endpage308
dc.identifier.issn1300-3356
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85037042088
dc.identifier.scopusqualityQ3
dc.identifier.startpage300
dc.identifier.urihttps://hdl.handle.net/11480/11229
dc.identifier.volume27
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherEge Universitesi
dc.relation.ispartofTekstil ve Konfeksiyon
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_20241106
dc.subjectImage processing
dc.subjectTextile cutting errors
dc.subjectTextile quality control
dc.titleComputer aided control of cutting error in textile products
dc.typeArticle

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu