Experimental assessment on performance, emission and combustion characteristics of the use of diesel-acetylene mixtures at different loads in a ci engine
Küçük Resim Yok
Tarih
2022
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The current test was completed on a three-cylinder, liquid-cooled, naturally aspirated, indirect injection with injector pump on the head, compression ignition (CI) engine at 1500 rpm under changing load conditions. Acetylene was pumped as a secondary gaseous fuel into the intake port at various flow rates, while diesel was fed into the cylinder immediately as a primary fuel. The rate of gas flow was set at 200 g/h and 400 g/h, respectively. Tests were conducted at %0, %25, %50, %75 and %100 load conditions at above acetylene mass. In terms of combustion parameters, the results were assayed and compared. Acetylene induction reduced brake thermal efficiency (BTE) across all load settings. The highest BTE of 34.91 percent was attained for baseline diesel in the experiments. Acetylene is added to diesel fuel causes increased CO, HC, and NOx values when compared to conventional diesel combustion but soot was decreased. On the other hand, there is no significant change in CO2 emissions.
Açıklama
Anahtar Kelimeler
CI, Engine, Diesel fuel, Acetylene
Kaynak
Fuel
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
324
