A study of microstructure and solidification behaviour of Zn-Cu alloy
Küçük Resim Yok
Tarih
2010
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
REDAKCIA KOVOVE MATERIALY
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Zn-1.5wt.%Cu peritectic alloy was prepared in a graphite crucible under a vacuum atmosphere. Unidirectional solidification of Zn-1.5wt.%Cu peritectic alloy was carried out with the Bridgman method by using metals of 99.99 % purity under the argon atmosphere and two different conditions; with a temperature gradient (G) range of 1.99-7.81 K mm(-1) at constant growth rate (V) and a growth rate range of 8.41-661.11 mu m s(-1) at a constant temperature gradient. The microstructures of the directionally solidified Zn-1.5wt.%Cu peritectic samples were observed to be cellular. From both transverse and longitudinal sections of the samples, cellular spacing (lambda), and cell tip radius (R) were measured and expressed as functions of solidification processing parameters (G and V) using a linear regression analysis. The experimental results were also compared with values calculated according to the current theoretical and numerical models, and similar previous experimental results.
Açıklama
Anahtar Kelimeler
metals & alloys, peritectic solidification, cellular growth, crystal growth
Kaynak
KOVOVE MATERIALY-METALLIC MATERIALS
WoS Q Değeri
Q2
Scopus Q Değeri
Q3
Cilt
48
Sayı
2