Characterization of building stones from the ancient Tyana aqueducts, Central Anatolia, Turkey: implications on the factors of deterioration processes
Küçük Resim Yok
Tarih
2018
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
SPRINGER HEIDELBERG
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Many archaeological and historical monuments constructed by different civilizations over the last 5500 years can be observed in the Nigde region located in central Anatolia. The Tyana aqueduct as a continuation of the Roman Pool is one such important historical monument. The aqueducts that carried the water of the Roman Pool to the ancient city of Tyana were constructed during the time of the Roman emperors Trajan, Hadrian and Marcus Aurelius Antoninus. Half of the total length of the aqueducts (3 km) is on the surface and the rest is buried. The engineering properties of the rocks used in such archaeological and historical buildings are very important in terms of conserving these structures for future generations. In this study, the geomechanical and geotechnical features of the Tyana aqueducts were investigated to understand the rock types, deterioration in the stones over time and problems originating from these features. Also, for restoration purposes, the ancient stone quarry areas for the aqueducts were identified, and the chemical, petrographical and geomechanical properties of fresh travertine blocks from these quarries were determined. The main rock type used as building stones in the aqueducts is Mio-Pliocene travertine. Laboratory studies were performed to determine the mineralogical, petrographic and petrophysical properties of the building stone samples. Fresh and used travertine samples were composed exclusively of calcite crystal. The results of chemical analyses were similar for fresh and used travertine samples. To determine the geomechanical properties of the travertines, dry unit weight, water absorption, effective porosity, P-wave velocity, Bohme abrasion test, capillary water absorption and uniaxial compressive strength experiments were conducted. In addition, Schmidt hammer hardness measurements were performed on site for the different levels and different textural characteristics of the belts on the travertines. According to the experimental data obtained, higher strength was displayed by samples with fine grains, massive texture and low porosity. The deterioration effects in most of the travertines used in the original structure are very low. In addition to human effects, the use of small stone dimensions (especially the stones used in belts as keystones) and the use of stone from the same quarry but with features that differ or are inferior are thought to be factors in the destruction of the Tyana aqueducts.
Açıklama
Anahtar Kelimeler
Anatolia, Tyana aqueducts, Deterioration, Geomechanical properties, Human effects, Nigde
Kaynak
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
77
Sayı
1
