Bazı azür bileşikleri ve türevlerinin asidik ortamda yumuşak çeliğin elektrokimyasal davranışına etkilerinin belirlenmesi
Yükleniyor...
Tarih
2012
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Niğde Üniversitesi / Fen Bilimleri Enstitüsü
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışma; Azür A, Azür B, Azür C, yeni sentezlediğimiz Schiff bazının 1,0 M HCl ortamındaki yumuşak çeliğin korozyon davranışına, inhibitör etkilerini belirlemek amacıyla yapılmıştır. Bunun için inhibitör içermeyen ve inhibitör olarak 1,0x10?6 M?1,0x10?4 M Azür A, Schiff bazı; 1,0x10?6 M?5,0x10?4 M Azür B, Azür C içeren 1,0 M HCl çözeltileri kullanılmıştır. Bu çözeltilerle 298 K'de 1?120 saat bekleme süreleri sonunda açığa çıkan hidrojen gazı miktarları ve EIS, bir saat bekleme süresi sonunda 298 K'de LPR ve 298?328 K'de potansiyodinamik polarizasyon ölçümleri yapılmıştır. Azür A ve 2?hidroksi?5?nitro benzaldehitin kondensasyon tepkimesi ile literatüre göre yeni bir Schiff bazı sentezlenmiş ve yapısı FTIR, UV-vis ve 1H-NMR analizleriyle aydınlatılmıştır. İnhibitörlerin hem kısa hem de uzun süreli beklemelerde etkin oldukları saptanmıştır. İnhibitör molekülleri elektrot yüzeyine Langmuir adsorpsiyon izotermine göre adsorplanmışlardır. İnhibitör molekülleri yüksek sıcaklıkta da yumuşak çelik yüzeyini korumuştur. Çalışılan tüm sıcaklıklarda, ? G°ads değerleri -40 kJ/mol'den daha negatif olduklarından adsorpsiyonun kimyasal olduğuna karar verilmiştir. Yüzey mikrografları, elektrot yüzeyinde çeliği korozyona karşı koruyucu bir film tabakası oluştuğunu açıkça göstermiştir. İnhibitörlerin olası adsorpsiyon bölgelerini belirlemek için kuantum kimyasal hesaplamalar yapılmıştır. Tüm yöntemlerle saptanan bulgular birbiriyle uyumlu olmuştur.
In this study, inhibition effects of 1,0x10?6 M?1,0x10?4 M Azure A and newly synthesized Schiff base, 1,0x10?6 M?5,0x10?4 M Azure B and Azure C on mild steel in 1.0 M HCl were evaluated by using EIS, LPR, SEM, AFM methods at 298 K and potentiodynamic polarization at 298?328 K. These studies were carried out at different concentrations, temperatures and durations. The Schiff base has been synthesized according to the literature and characterized by FTIR, UV-vis and 1H-NMR analysis. The inhibitor molecules were adsorbed on electrode surface according to the Langmuir?s adsorption isotherm. Inhibition efficiency values of mild steel increased when the inhibitor concentrations increase. Both long and short term corrosion tests clarified that the inhibitor molecules protected the mild steel in HCl solution effectively. Inhibitor molecules protected the mild steel surface at higher temperatures. At all temperatures studied, inhibitors show that the values of ? G°ads are more negative than ?40 kJ/mol, which indicates a chemisorption process. Surface micrographs clearly indicate that a protective film formation occurred on the mild steel surface and this film inhibited the corrosion of mild steel. The quantum chemical calculations were employed to give further insight into the inhibition mechanism of inhibitor molecules. The results obtained by all methods were good agreement with each other.
In this study, inhibition effects of 1,0x10?6 M?1,0x10?4 M Azure A and newly synthesized Schiff base, 1,0x10?6 M?5,0x10?4 M Azure B and Azure C on mild steel in 1.0 M HCl were evaluated by using EIS, LPR, SEM, AFM methods at 298 K and potentiodynamic polarization at 298?328 K. These studies were carried out at different concentrations, temperatures and durations. The Schiff base has been synthesized according to the literature and characterized by FTIR, UV-vis and 1H-NMR analysis. The inhibitor molecules were adsorbed on electrode surface according to the Langmuir?s adsorption isotherm. Inhibition efficiency values of mild steel increased when the inhibitor concentrations increase. Both long and short term corrosion tests clarified that the inhibitor molecules protected the mild steel in HCl solution effectively. Inhibitor molecules protected the mild steel surface at higher temperatures. At all temperatures studied, inhibitors show that the values of ? G°ads are more negative than ?40 kJ/mol, which indicates a chemisorption process. Surface micrographs clearly indicate that a protective film formation occurred on the mild steel surface and this film inhibited the corrosion of mild steel. The quantum chemical calculations were employed to give further insight into the inhibition mechanism of inhibitor molecules. The results obtained by all methods were good agreement with each other.
Açıklama
Bu tez, Niğde Üniversitesi Bilimsel Araştırma Projeleri Birimi FEB/2010–14 no’lu proje ile finansal olarak desteklenmiştir.
Anahtar Kelimeler
Schiff Bazı Sentezi, Elektrokimyasal İmpedans Spektroskopisi, Taramalı Elektron Mikroskobu, Atomik Kuvvet Mikroskobu, Moleküler Modelleme, Schiff Base Synthesis, Electrochemical İmpedance Spectroscopy, Scanning Electron Microscopy, Atomic Force Microscopy, Molecular Modelling
Kaynak
WoS Q Değeri
Scopus Q Değeri
Cilt
Sayı
Künye
Özkır, D. (2012). Bazı azür bileşikleri ve türevlerinin asidik ortamda yumuşak çeliğin elektrokimyasal davranışına etkilerinin belirlenmesi. (Doktora Tezi). Niğde Üniversitesi, Fen Bilimleri Enstitüsü, Niğde