Growth and characterization of Cu2SnS3 (CTS), Cu2SnSe3 (CTSe), and Cu2Sn(S,Se)3 (CTSSe) thin films using dip-coated Cu–Sn precursor
Küçük Resim Yok
Tarih
2019
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer New York LLC
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Ternary compounds Cu2SnS3, Cu2SnSe3 and Cu2Sn(S,Se)3 thin films used in thin film solar cell applications were prepared at the first time by such a two-stage process that includes dip-coating of Cu–Sn precursors as distinct from vacuum-based fabrication methods followed by sulfurization/selenization of prepared precursors via rapid thermal processing at 550 °C. All prepared thin films revealed Cu-poor composition. X-ray diffraction and Raman spectra of the samples showed that Cu2SnS3 and Cu2SnSe3 thin films had a monoclinic structure as a dominant phase and additionally some secondary phases such as tetragonal Cu2SnS3 and orthorhombic Cu3SnS4. However, the tetragonal and orthorhombic phases had more impact on Cu2Sn(SSe)3 thin film. Compact, dense, and small grained surface morphologies were obtained for the Cu2SnS3 and Cu2Sn(SSe)3 thin films, while the surface morphology of the Cu2SnSe3 thin film had larger grained surface morphology. The Cu2SnS3 thin film demonstrated higher transmittance (~ 65%) and two different absorption edges that indicates formation of two band gap energy. Band gap values of Cu2SnS3, Cu2Sn(SSe)3 and Cu2SnSe3 thin films were found 0.97 eV (and 1.51 eV), 1.25 eV and 0.78 eV, respectively. The lowest resistivity (2.48 × 10-1 ? cm) and the highest carrier concentration (1.64 × 1019 cm-3) values were observed for Cu2Sn(SSe)3 thin film. © 2019, Springer Science+Business Media, LLC, part of Springer Nature.
Açıklama
Anahtar Kelimeler
Kaynak
Journal of Materials Science: Materials in Electronics
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
30
Sayı
13
