Enhancement of Shear Strength in Lap Joints with Different Surface Patterns

Basit Öğe Kaydı
dc.contributor.authorYaka, Harun
dc.contributor.authorSemiz, Levent
dc.contributor.authorAkkuş, Harun
dc.date.accessioned2024-11-07T13:19:37Z
dc.date.available2024-11-07T13:19:37Z
dc.date.issued2023
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractIn this study, surface patterning with CNC vertical machining center was applied to aluminum surface for the enhancement of the shear strength of the epoxy bonded lap joints. It was found that the pattern shape affected shear strength and among vertical, square, horizontal, 45 degree and diamond patterns, 45 degree provided the highest shear strength of 24.6 MPa. Moreover, the pattern features also affected the shear strength. Decrease in the depth led to slightly lower shear strength, whereas increase in the depth gave slight enhancement. The optimum depth was found as 300 ?m and the obtained shear strength was calculated as 25.5 MPa. Additionally, increase in the width length led to lower shear strength. On the other hand, decrease in the width length provided higher shear strength. The increment became smaller as the width length increased. Also, after a point, the trend reversed and the shear strength decrease slightly. The optimum width length and the corresponding shear strength were found as 1.0 mm and 28.0 MPa, respectively.
dc.identifier.endpage1480
dc.identifier.issn2687-3729
dc.identifier.issue2
dc.identifier.startpage1469
dc.identifier.trdizinid1205657
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1205657
dc.identifier.urihttps://hdl.handle.net/11480/13254
dc.identifier.volume6
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofOsmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online)
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241107
dc.subjectMalzeme Bilimleri
dc.subjectÖzellik ve Test
dc.subjectMalzeme Bilimleri
dc.subjectKaplamalar ve Filmler
dc.subjectİmalat Mühendisliği
dc.subjectMühendislik
dc.subjectKimya
dc.subjectCNC
dc.subjectEpoxy
dc.subjectShear strength
dc.subjectLap joint
dc.subjectSurface pattern
dc.titleEnhancement of Shear Strength in Lap Joints with Different Surface Patterns
dc.typeArticle

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu