Mechanical and microstructural properties of cement mortars developed with different curing conditions and design parameters

Basit Öğe Kaydı
dc.contributor.authorGüneş, Muhammet
dc.contributor.authorYücel, Hasan
dc.contributor.authorÖz, Hatice
dc.date.accessioned2024-11-07T13:16:42Z
dc.date.available2024-11-07T13:16:42Z
dc.date.issued2022
dc.departmentNiğde Ömer Halisdemir Üniversitesi
dc.description.abstractThe aim of this study is the investigation of microstructural effects on cement mortars (CMs) of four different parameters as cement dosage, water/cement ratio, pozzolanic material and curing effect. To achieve the purpose of this study, SEM/EDX, XRD, FTIR and TGA/DTA analysis were performed. A total of 18 mixtures were produced and exposed to water curing (WC) and air curing (AC). In the design of these mixtures, three different cement dosages as 360, 400 and 450 kg/m3 and three different water/cement ratios as 0.40, 0.45 and 0.50 were used. Silica fume (SF) was preferred to observe the effect on microstructural properties clearly of pozzolanic material. In addition, super plasticizer (SP) was utilized in all mixtures and kept constant as 12 kg/m3. The compressive strength, flexural strength and ultrasonic pulse velocity (UPV) of these mixtures were determined at 28 and 90 days. Eight mixtures were chosen to observe the effect of four different parameters in a microstructural sense. XRD, SEM/EDX, FTIR and TGA/DTA analyses were applied to these mixtures. It can be said that microstructural analyses supported the findings obtained from mechanical tests.
dc.identifier.doi10.28948/ngmuh.1055199
dc.identifier.endpage726
dc.identifier.issn2564-6605
dc.identifier.issue3
dc.identifier.startpage713
dc.identifier.trdizinid1132093
dc.identifier.urihttps://doi.org/10.28948/ngmuh.1055199
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1132093
dc.identifier.urihttps://hdl.handle.net/11480/12505
dc.identifier.volume11
dc.indekslendigikaynakTR-Dizin
dc.language.isoen
dc.relation.ispartofNiğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_20241107
dc.subjectİnşaat Mühendisliği
dc.subjectMalzeme Bilimleri
dc.subjectÖzellik ve Test
dc.subjectMalzeme Bilimleri
dc.subjectSeramik
dc.subjectFTIR
dc.subjectXRD
dc.subjectMicrostructural properties
dc.subjectTGA/DTA
dc.subjectCement mortars
dc.titleMechanical and microstructural properties of cement mortars developed with different curing conditions and design parameters
dc.typeArticle

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu
Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi Koleksiyonu